Lawrence Livermore National Laboratory (LLNL) scientists recently published the results of a three-week experimental campaign at the Lab’s Jupiter Laser Facility to test the performance of laser-heated additive manufactured foams.
The project helps support two major Laboratory focus areas, including helping to advance additive manufacturing and by enabling improvements in performance of hohlraums — which are laser-heated cavities that produce an X-ray radiation drive that implodes a deuterium-filled capsule.
The work also supports the advancement of the state-of-the-art in high energy density science. In particular, by enabling more efficient hohlraums, it should help reach the inertial confinement fusion (ICF) program goal of achieving ignition in the laboratory.
Oggie Jones, lead author of the work which was featured in Physics of Plasmas, said to the team’s knowledge this was first time experiments have been made on laser-heated structured additive manufactured foams.
The major findings in the research showed that laser-heated additive manufactured foams behaved in many ways similarly to chemical (aerogel) foams of similar densities. The amount of backscattered laser light for a given laser intensity and the propagation speed of a thermal wave though the plasma were similar.
“This was true even though the additive manufactured foams have filamentary structures of order 100 times thicker than chemical foams of the same density,” Jones said. “The additive manufactured foams themselves were also found to behave fairly independently of the scale size.”
The team tested geometrically similar additive manufactured foams, one with 0.5 micron-thick filaments and one with 10-micron thick filaments. The backscatter and X-ray image signatures were nearly indistinguishable. The team found that published foam analytical models were generally able to explain the measured thermal propagation speeds and temperatures measured in the experiments.
LLNL researchers present new experimental data on laser-heated additive manufactured foams. Samples of four different types of printed manufactured foams were heated using a single 527 nm laser beam at the Jupiter Laser Facility. This image depicts one of the experiments performed using forward and backward unabsorbed and scattered light.
Jones explained that the use of foam materials in hohlraums opens up new design possibilities in indirect drive in inertial confinement fusion. In particular, foams can be placed inside the hohlraum to line the walls.
“If the density of the foam is carefully selected, it is possible to change how the hohlraum wall material expands with time and thus potentially improve the symmetry of the radiation drive onto the ICF capsule,” he said.
In addition, very low density foams doped with various elements can be used to tailor the plasma conditions inside the hohlraum and potentially mitigate laser plasma interactions (laser backscatter). Additive manufactured foams allow the finest control over the plasma conditions. Density and dopant gradients can be built into the foam. Since these foams are inside the hohlraum, the way they are heated by the laser is key to understanding their overall impact on hohlraum performance.
The experiments used a single 527-nanometer (green) laser beam. The laser pulse was 200 joules, about two nanoseconds in duration and resulted in a peak laser intensity of 3x1014 W/cm2 on the foam targets. During a week of beam time, the team shot approximately 20 different foam targets.
Elijah Kemp served as lead experimentalist on this project and coauthors included Steve Langer, Benjamin Winjum, Dick Berger, James Oakdale, Mikhail Belyaev, Juergen Biener, Monika Biener, Derek Mariscal, Jose Milovich, Michael Stadermann, Phil Sterne and Scott Wilks.
A second paper on this research, focused on numerical simulations of these experiments, also has been accepted for publication by Plasma Physics and Controlled Fusion. Authors include Jose Milovich, Ogden Jones, Dick Berger, Elijah Kemp, James Oakdale, Juergen Biener, Mike Belyaev, Derek Mariscal, Steve Langer, Phil Sterne, Scott Sepke and Michael Stadermann.
The novel foam targets were produced at LLNL by a group led by Stadermann, Juergen Biener and Oakdale.
The work was funded by LLNL’s Weapons and Complex Integration Laboratory Directed Research and Development (LDRD) program titled “Foams in Hohlraums.”
This research has led to a follow-on LDRD project titled “Foam Fills for LPI Suppression.” In this project, researchers will explore specific low-density foam fill configurations that lead to reduced backscatter in ICF hohlraums.
“If successful, this research could enable hohlraums to operate at fill densities that did not work with simple helium gas fills,” Jones said. “This would open up an area of design space that was previously closed due to excessive laser backscatter.”